M12 1.5 80mm titanium extended wheel studs

$360.00$460.00

Our studs are a M12 size with a 1.5 thread pitch which is pretty much standard for most applications. We offer 2 length sizes. 82mm long or 105mm long and both studs feature an extended thread length on the head of the stud compared to most other extended wheel studs.

82mm and 105mm length options
M12 1.5
Knurl Diameter 0.565/14.3mm
20 studs weigh 28oz /1.75lbs

All stud kits will include a special titanium anti gall paste cup to help protect the threads.

Description

Introducing the EvoSpec Performance TITANIUM wheel studs. These studs are not like anything else available today. Our studs were designed to fit everyone’s needs and in a much safer way.

Our studs are a M12 size with a 1.5 thread pitch which is pretty much standard for most applications. We offer 2 length sizes. 82mm long or 105mm long and both studs feature an extended thread length on the head of the stud compared to most other extended wheel studs. This gives you approximately 7mm more thread length of contact onto your lug nut for a much safer installation. The reason we did this is for those who use spacers or just have poorly designed lug nuts that are not true 100% threaded design inside. The amount of thread contact from the stud onto the lug nut is a big deal not only for a proper installation but for safety as well. Now you can be sure you have the most thread contact between the lug nut and stud as possible with our stud options.

Also the base of our stud is has a larger OD footprint then typical studs giving you a much stronger and wider mating surface support once installed.

If the 82mm stud is still not long enough or giving you enough thread contact on your lug nuts we also offer a 105mm long stud to fit those needs. The longer 105mm studs also give you an additional 23mm in usable length for those who are running 20+mm thick wheel spacers.

Our 82mm titanium studs weigh in at 7grams each and comes out to be about a 1.5lb rotational weight savings over other steel style extended wheel studs.

Specs

82mm and 105mm length options
M12 1.5
Knurl Diameter 0.565/14.3mm
20 studs weigh 28oz /1.75lbs

All stud kits will include a special titanium anti gall paste cup to help protect the threads.

 

DISCLAIMER PROPER Installation of these studs should be pressed in from the back side ONLY. DO NOT use a lug nut to pull the stud through the hole. If you do not have the ability to install these properly DO NOT BUY them OR you may Send me your wheel bearings and I will press out your old studs and press in the new studs 100% free of charge other then return shipping back to you. Turn around Time will depend how quickly they arrive and how quickly you want them back. These are made of grade 5 Ti-6Al-4V. They are NOT stronger then a typical heat-treated 8740 chrome molly steel stud. Titanium studs also require a lot of attention to detail, maintenance, inspection and 100% proper use of insulation of the stud and lugnuts. BUY AT YOUR OWN RISK. When installing your lug nuts onto studs regardless if they are titanium or not DO NOT use impact guns. It is recommended to use hand tools and a torque wrench.

Additional stud installation offering for our customers.
If you do not have a press or a way to press them in properly or somewhere who can press them in for you we are offering 100% free service to our customers for pressing in our studs. Send us your wheel bearings, we will knock out the studs and press in our studs absolutely free. You just pay return shipping back to you.

Additional information

Length Options

82mm, 105mm